Skip to content
- European ATEX Explosion-proof Directive Compliant Zone1 Zone2
- Highly rigid lightweight body made of reinforced plastic
- Used the world’s first rotating nozzle
- Possible to remove static electricity with clean air by installing a filter
- Can be extended up to 35m by connecting to ES53 power supply
- Safe Shielded high voltage cable adopted
- Working distance: 150 mm max.
- Air consumption with 1/4” tube: 4 Nm3/h using 1 bar
- Air consumption with 3/8” tube: 8,5 Nm3/h using 1 bar
- Max. pressure: 6 bar
- Working distance 150 mm
- Housing material plastic, stainless steel
- Ionization point special alloy
- Shockless structure that emphasizes safety (capacitive coupling method)
- Nozzles can be used alone or combined to remove static electricity and foreign matter over a wide area.
- Air blow part has nozzle tip made of nylon and prevents outbreak of dew condensation.
- Color (body part) blue
- Minimum mounting pitch (mm) Connection type special specification 77mm
- We can choose nozzle shape, blowing shape to shape
- Since the high-voltage cable can be connected in a straight or right-angle direction with a compact shape, it is easy to install
- Simco’s original ionization technology and highly efficient air blow are realized
- Electrode body material Plastic (PA6.6 30% GF)
- Compact design
- Various output attachments available
- Powered by low voltage power supply or through VDC input
- Can daisy chain up to 6 units
- Power Input 24VDC
- Housing Polycarbonate with 94V-0 flame rating
- Dimensions 2.5″ H x 1.3″ W x 4.5″ L (64mm H x 33mm W x 115mm L)
- Discharge 1.3 sec @ 6” (15.2 cm), 30 psi (±1000-100V); 0.5 sec @ 2” (5 cm), 60 psi (±1000-100V)
- Balance ±15V
- Gas Input 20-65 psi, Clean Dry Air (CDA) or nitrogen
- Lightweight, Ergonomic Design
- Flow Control Valve for Adjustable Airflow
- Electrically balanced ion output
- Integrated, Replaceable Filter-Nozzle
- Ionization Indicator Light
- Inexpensive general-purpose nozzle
- Hastelloy B-2 (nickel alloy) is used for the discharge needle
- Nozzle can be used alone or connected to remove static electricity and dust over a wide area
- Format Air nozzle H Color (main body part) Red
- Minimum mounting pitch (mm) – Connection type Special specification 40mm
- Cleanliness Body: All stainless steel frame (SUS304)
- Discharge needle: Titanium emitter
- Insulation material: Nylon
- Large flow rate specification
- Achieves 1.5 times the flow rate compared to the conventional model 350l/m (at 0.5MPa)
- Expansion of static elimination area
- Ion balance performance within ±10 V
- Built-in essential ion balance circuit realizes stable ion balance over a long period of time
- Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate
- Clean, uniform, high-velocity ionized air provides ‘‘one-step’’ cleaning
- Direct-drive motors require little or no maintenance
- Anodised finish for corrosion protection
- Connection for pressure sensor
- New design extruded aluminium profile
- Cost efficient versus compressed air
- Two mounting grooves
- Small blower/ low noise level
- Supply voltage: 24 V DC nominal
- Compressed air 1 – 7 bar (15 – 100 PSI)
- Connection G ¼’’ female thread and 8 mm hose connection
- Protection class IP66
- Supply voltage24 V DC nominal
- Energy consumptionMax. 0,3 A DC
