Single Wire WRIST STRAP, ADJUSTABLE METAL (AMWS121M)

  • Made from stainless steel, the durable premium performance metal wrist band creates a reliable electrical contact to the user’s wrist.
  • The flex-metal style band uses adjustable links to assure a secure and comfortable fit.

Disposable Wrist Strap (2209)

  • Disposable non-woven fabric wrist strap that provides cost-effective and reliable grounding
  • Use for visitors and one-time use applications. Suited for shipment along with components and devices, such as memory upgrades, sound cards, etc., to provide protection at the receiving end.
  • Hypo-allergenic adhesive provides 360 degree contact with skin
  • Minimizes skin-to-band resistance.
  • Conductive adhesive on the copper foil adheres to any convenient electrical ground
  • Current limiting resistance is built into the plastic ribbon below the wrist band
  • Length: 5ft.
  • Individually packaged
  • Meets ANSI/ESD S20.20 wrist strap system required limit tested per ESD TR53

Single Wire WRIST STRAP, ADJUSTABLE (2214)

  • Adjustable Wrist Straps provide a comfortable, custom fit.
  • One size adjusts to most any size wrist to provide reliable, 360-degree protection.
  • A 1 megohm resistor is built into the ground cord. Available with 1/8 in. (4 mm) snap end.

Single Wire Thermplastic Wrist Strap with 4mm Snap (4650)

  • Single-Wire Thermoplastic Wrist Strap
  • > 1 x 107 ohm exterior with conductive interior < 1 x 105 ohms
  • Zipper Style Latching Mechanism
  • Easily adjusts to most wrist sizes
  • 4mm male snap
  • 4610 5’ Coil Cord
  • One megohm current limiting resistor located at socket end
  • Meets requirements of ANSI/ESD S20.20 and Wrist Strap standard ANSI/ESD S1.1

Dual-Wire Thermoplastic Adjustable Wrist Strap (2242)

  • 360º Rotation Between Wristband and Coil Cord
  • Promotes freedom of motion and reduces strain on the operator’s wrist
  • Magnetic Connection Between Wristband and Coil Cord
  • Creates a superior electrical connection to eliminate intermittent failures found in traditional snap and spring connections; extends the lifespan of the wrist strap and maintains a 1-5 pound perpendicular breakaway force to prevent accidental disconnects
  • Dual-Wire Wrist Strap
  • Creates a redundant path-to-ground for an operator with resistance <3.5 x 107 ohms per the required limits of ANSI/ESD S20.20 for
  • Method 1. If one conductor is damaged, the operator will maintain the path-to-ground through the second conductor.
  • Lightweight Thermoplastic Elastomer Construction

Dual Wire Metal Wrist Strap Kit (2232)

  • NEW 360° Rotation Between Wristband and Coil Cord
  • NEW Magnetic Connection Between Wrist Band and Coil Cord
  • Creates a superior electrical connection to eliminate intermittent failures that can occur in traditional snap connections using springs, extend lifespan of the wrist strap, and maintain a 1-5 pound perpendicular breakaway force to prevent accidental disconnects.
  • Dual Wire Metal Expansion Wristband and Coil Cord
  • Creates a path-to-ground for an operator with resistance <3.5 x 107ohms per the required limits of ANSI/ESD S20.20, tested per ANSI/ESD S1.1 or ESD TR53. If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor.
  • Coil Cord
  • 3.5mm Right Angle Mono Plug Connector
  • Works with standard dual wire monitors and grounding jacks.
  • Relaxed Retraction Coil Cord

Dual Wire WRIST STRAP ADJUSTABLE (2369)

  • Adjustable, elastic nylon material with conductive woven thread
  • Fits most sizes to provide reliable protection
  • Dual-Wire conductor provides redundancy
  • Even if one dual-wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire
  • Meets requirements of ANSI/ESD S20.20 and ANSI/ESD S1.1
  • 3.4mm plug size
  • One megohm series resistor
  • To protect operator from accidental contact with equipment line voltage.
  • Superior resistor connection strain relief
  • Exceeds ANSI/ESD S1.1 Bending Life Test. Tested at over 200,000 cycles vs. the 16,000 requirement.

770758 – DUAL COMBINATION TESTER

  • Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms1
  • Compatible with Single-Wire and Dual-Wire Wrist Straps
  • Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds
  • Reduces time spent testing personal grounding devices used in ESD Control Plans
  • Solid-State Test Switch with No Moving Parts
  • Maintains accuracy of tests and extends the lifetime of the tester
  • Split Foot Plate for Testing Foot Grounders (or ESD Shoes)
  • Tests both foot grounders independently at the same time
  • 30 Volt Test Signal
  • Relay for Use with Automatic Doors or Other Locking Systems
  • Controls access to ESD Protected Areas
  • Optional Stand

770030 – Combo Wrist Strap and Footwear Tester

  • Tests operator’s resistance loop; wrist strap limits 750 kilohms to 10 megohms; footwear limits 750 kilohms to 100 megohms
  • Determines that operator’s personal grounding device is functioning correctly.
  • Separate test circuits for wrist straps and foot grounders
  • Rocker switch allows operator to quickly test all personal grounding devices.
  • Use with Single-Wire Wrist Straps
  • Durable, stainless steel test button
  • Long lasting; reduces wear and tear.
  • Powered by 9V battery or optional power adapter
  • Optional foot plate and stand