Continuously monitors the path-to-ground integrity of two operators and one conductive or dissipative worksurface; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
Digital Signal Processing Technology
Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor
Operator Body Voltage Detection
Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
0.40 Volt Operator Test Voltage
Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
500 Millisecond Alarm Response Time
Identifies failures and intermittencies that inferior technologies miss
Operator Remote Disconnect Alarm
Prevents tampering should one intentionally disconnect the operator remote from the monitor
Miniature Monitor Size (0.85 x 2.4 x 2.6 inches)
Occupies minimal space and includes mounting tabs secure installations
Single workstation continuous monitor – Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
Continuously monitors 2 operator dual-wire wrist straps and 1 worksurface mat – Visible and audible alarms indicate improper grounding of the operator and worksurface
Adjustable operator test voltage and upper limit – Test voltage can be set to 9 or 16 volts; test limit can be set to 10 or 35 megohms
Adjustable audible alarm -Buzzer volume may be disabled or set to loud or soft
Simple installation and setup
Mounting hardware and wire management clips are included
