Categories: ESD Monitor

CTM048-21 – EM Eye – ESD Event Meter

• Detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior and parametric errors
• Calculates event magnitude for Charged Device Model (CDM), Human Body Model (HBM) and Machine Model (MM)
• Records all measurements to a microSD card for PC download
• Touchscreen display provides intuitive user interface
• Rechargeable lithium ion battery
• Assembled in the United States of America with Globally Sourced Materials

CTC337-WW – Wrist Strap and Ground Dual-Wire Monitor

• Operator and Equipment Ground Continuous Monitor
• Continuously monitors the path-to-ground integrity of two operators and one metal tool; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
• Operator Body Voltage Detection
• Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item
• Digital Signal Processing Technology
• Applies a low test voltage to the operator (0.10V) for the handling of sensitive components
• Miniature Size (0.85” H x 2.4” W x 2.6” L)
• Uses minimal workspace and includes mounting tabs for installation underneath table tops
• Use with Dual-Wire Wrist Straps
• Replaceable Dual-Wire Operator Jack
• NIST Calibrated with Certificate Included
• 100-240VAC Power Adapter with Interchangeable Plugs

CTC334-WW – Ground Man Plus Dual-Wire Monitor

• Equipment Ground Continuous Monitor
• Continuously monitors the path-to-ground integrity of an operator and three metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01.
• Operator Body Voltage Detection
• Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item.
• Digital Signal Processing Technology
• Applies a low test voltage to the operator (0.40V) for the handling of sensitive components.
• Miniature Size (0.85″ H x 2.4″ W x 2.6″ L)
• Uses minimal workspace and includes mounting tabs.
• Use with Dual-Wire Wrist Straps
• Replaceable Dual-Wire Operator Jack
• Calibration Unit Available for Accurate Performance and Conformity Testing in the Field
• NIST Calibrated with Certificate Included
• 100-240VAC Power Adapter with Interchangeable Plugs

CTC331-WW – Iron Man® Plus Dual-Wire Monitor

• Single Workstation Continuous Monitor
• Continuously monitors the path-to-ground integrity of an operator and conductive or dissipative worksurface and meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
• Electrical Overstress (EOS) Detection
• Alarms if overvoltage (±5V or less) from a tool such as a soldering iron or electric screwdriver is applied to a circuit board under assembly
• Operator Body Voltage Detection
• Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item
• Digital Signal Processing Technology
• Applies a low test voltage to the operator (0.40V) for the handling of sensitive components
• Miniature Size (0.85” H x 2.4” W x 2.6” L)
• Uses minimal workspace and includes mounting tabs for installation underneath table tops
• Use with Dual-Wire Wrist Straps
• Replaceable Dual-Wire Operator Jack

CTC062-RT-242-WW – WS AWARE MONITOR

• Dual Workstation Continuous Monitor
• Continuously monitors the path-to-ground integrity of two operators and four metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
• Digital Signal Processing Technology
• Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components
• Operator Body Voltage Detection
• Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
• EMI Monitoring on Metal Grounds
• Alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage
• System Includes Monitor and Two Remote Terminals
• Each remote terminal includes a monitored jack for operators and an unmonitored jack for visitors.
• Relay Terminal
• Outputs 0/20 mA logic level for relay input

CTC061-3-242-WW – WS AWARE MONITOR

• Dual Workstation Continuous Monitor
• Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
• Digital Signal Processing Technology
• Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components
• Operator Body Voltage Detection
• Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
• EMI Monitoring on Metal Grounds
• Alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage
• System Includes Monitor and Two Remote Terminals
• Monitor can be installed at eye level, and remote terminals can be mounted at desired locations up to 10 feet away.

724 Plus Workstation Dual-Wire Monitor

• Single Workstation Continuous Monitor
• Continuously monitors the path-to-ground integrity of two operators and one conductive or dissipative worksurface; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
• Digital Signal Processing Technology
• Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor
• Operator Body Voltage Detection
• Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
• 0.40 Volt Operator Test Voltage
• Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
• 500 Millisecond Alarm Response Time
• Identifies failures and intermittencies that inferior technologies miss
• Operator Remote Disconnect Alarm
• Prevents tampering should one intentionally disconnect the operator remote from the monitor
• Miniature Monitor Size (0.85 x 2.4 x 2.6 inches)
• Occupies minimal space and includes mounting tabs secure installations

770067 – WS Aware Dual-Wire Monitor with Standard Remotes and Ethernet Output

• NEW SCS 770069 Power Relay Compatibility
• Controls power to workbenches, hand tools, and other electronic devices dependent on the WS Aware Monitor’s status
• Dual Workstation Continuous Monitor
• Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01.
• Ethernet Connectivity
• Provides network communication with Static Management Program (SMP). Data collected through SMP includes operator resistance, operator voltage, mat resistance, metal tool impedance and metal tool EMI voltage.
• Digital Signal Processing Technology
• Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components.
• Operator Body Voltage Detection
• Alarms if the operator generates or contacts voltage that would be dangerous to an ESD susceptible item.
• EMI Monitoring on Metal Grounds

770049 – COMMON POINT GROUND MONITOR

• AC Outlet Continuous Monitor
• Continuously monitors the path-to-ground integrity of the outlet; meets the ANSI/ESD S6.1 requirement for verifying wiring orientation
• Visual Common Point Ground Indicator
• Identifies a properly wired AC outlet that may be used for grounding purposes of an ESD Control Plan
• Visual and Audio Fault Alarms
• Alarms instantly when a failure occurs to alert operators and supervisors of a problem
• Six Banana Jacks and Six Screws for #8 Ring Terminals
• Provides numerous groundable points for wrist straps, mats, carts, tools, and other items. May also be connected to other grounding hubs (see item 770043).
• Enclosure with Mounting Tabs
• Allows the monitor to be placed away from the AC outlet and in areas of high visibility

770044 – GROUND MASTER MONITOR, ETHERNET

• NEW 7-24VDC Power Input Terminals
• Pairs with voltage sources commonly found inside machinery and eliminates the need for a power adapter
• Equipment Ground Continuous Monitor
• Continuously monitors the path-to-ground impedance of eight metal tools; meets ANSI/ESD S20.20.
• Ethernet Connectivity
• Provides communication with Static Management Program (SMP). Data collected through SMP includes metal ground impedance and EMI voltage.
• Optical Relay
• Pairs with lights and buzzers for increased visibility.
• EMI Monitoring on Metal Grounds
• Alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage.
• Calibration Verification
• NIST Calibrated with Certificate Included
• 100-240VAC Power Adapter with Interchangeable Plugs