R7

  • Provides a worksurface that is low outgassing and low VOC
  • Dissipative Dual Layer Rubber Material
  • Color (1 x 106to < 1 x 109 ohms Rtt) Top Layer Meets ANSI/ESD S20.20 worksurface required limit Black Side Bottom Layer
  • The dedicated conductive layer reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors. Electricals will not drift for the life of the mat.
  • High Strength Nitrile Rubber Compound
  • Non-Humidity Dependence
  • Resistances
    1. Surface to Ground (Rtg) 1 x 106 to < 1 x 109 ohms
    2. Surface to Surface (Rtt)1 x 106 to < 1 x 109 ohms

R3

  • Dissipative Dual Layer Rubber Material Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items.
  • Black Side Bottom Layer
    The dedicated conductive layer reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors.
  • High Strength Nitrile Rubber Compound
  • Constructed to withstand abrasion, tearing and may be used in soldering applications with flux and other chemicals.
  • Non-Humidity Dependence
  • Resistances
    1. Surface to Ground (Rtg) 1 x 106 to < 1 x 109 ohms
    2. Surface to Surface (Rtt) 1 x 106 to < 1 x 109 ohms

3 Layer Premium Vinyl

  • This three-layer vinyl material provides excellent electrical properties.
  • The top layer is made from a tough, easy-to-clean dissipative vinyl.
  • The center layer, a highly conductive metal scrim, moves the charge from the surface to ground quickly. The bottom layer is a durable, non-skid, cushion of dissipative foam.
  • Compatible with constant monitors. Available in rolls, mats, and mats with a ground cord.
  • Meets ANSI/ESD S20.20 worksurface required limits and recommendation of ANSI/ESD S4.1
  • Resistances
    1. Surface to Ground (Rtg) 1 x 106 to < 1 x 109 ohms
    2. Surface to Surface (Rtt) 1 x 106 to < 1 x 109 ohms

Anti Fatigue Mat (9900)

  • Static Control Anti-Fatigue Mats enable workers to stand comfortably for long periods while minimizing the fatigue associated with standing work.
  • Reversible Conductive Rubber Floor Matting
  • Provides a flooring surface that does not generate a static charge and will act as part of the path to ground for an operator wearing ESD footwear
  • Rtt: < 1 x 106 ohms per ANSI/ESD 7.1 and ESD TR53
  • Low Profile
  • Reduces trip hazards and designed for use in high traffic areas and good for use under chairs and carts.
  • Resistance:
    1. Surface to Ground Snap (Rtg) < 1 x 105 ohms
    2. Surface to Ground (Rtt)
    3. < 2 x 105 ohms

8900

  • Dissipative Dual Layer Rubber Material
  • 2-Layer Neoprene Rubber Material
  • Constructed using a top color layer of static dissipative neoprene rubber laminated to a bottom black layer of conductive neoprene rubber
  • High Strength Vulcanized Synthetic Neoprene Rubber Heat and Chemical Resistant
  • Designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals
  • Ultraviolet (UV) Stabilizer Additives
  • Color Top Layer
  • Resistances
    1. Surface to Ground (Rtg)
    2. Surface to Surface (Rtt)
    3. 1 x 106 to < 1 x 109 ohms
    4. 1 x 106 to < 1 x 109 ohms
  • Conductive Bottom Layer
    1. Resistance < 1 x 105 ohms
    2. Surface to Surface (Rtt)

8200 Vinyl

  • 8200 Series Dissipative Vinyl Three-Layer Mats and Rolls are soft table mats with a three-layer construction that meet ANSI/ESD S20.20 tested per worksurface standard ANSI/ESD STM4.1-2017. The top color layer is durable static dissipative vinyl, which has sufficiently low resistance to discharge static-laden conductors, yet will help prevent the shorting of pins on the backs of printed circuit boards laid on the mat. The middle layer is a highly-conductive scrim that provides the main discharge path to ground, and the bottom layer is static-dissipative foam, providing a durable nonskid cushion. Compatible with Constant Monitors.
  • Resistance
    1. Surface to Ground (Rtg)
    2. Surface to Surface (Rtt)
    3. 1 x 106 to < 1 x 109 ohms
    4. 1 x 106 to < 1 x 109 ohms

8200 Floor Mat

  • 8200 Series Dissipative Vinyl Three-Layer Mats and Rolls are soft table mats with a three-layer construction that meet ANSI/ESD S20.20 tested per worksurface standard ANSI/ESD STM4.1-2017. The top color layer is durable static dissipative vinyl, which has sufficiently low resistance to discharge static-laden conductors, yet will help prevent the shorting of pins on the backs of printed circuit boards laid on the mat. The middle layer is a highly-conductive scrim that provides the main discharge path to ground, and the bottom layer is static-dissipative foam, providing a durable nonskid cushion. Compatible with Constant Monitors.
  • Resistance
    1. Surface to Ground (Rtg)
    2. Surface to Surface (Rtt)
    3. 1 x 106 to < 1 x 109 ohms
    4. 1 x 106 to < 1 x 109 ohms

1964

  • Conductive Vinyl Floor Matting
  • Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear
  • Rtg: < 1 x 106ohms per ANSI/ESD 7.1 and ESD TR53
  • Meets the required limits of ANSI/ESD S20.20 and is suitable flooring component in personnel grounding Footwear/Flooring System (Ref: STM97.1 and STM97.2). The resistance range of the surface layer remains low enough to act as a path to ground with the normal build-up of dirt and grime on the mat.
  • Non-carbon loaded, non-sloughing and permanently conductive
  • Providing a static-safe conductive work area for a wide variety of applications where ESD properties are required.
  • Resistance
    1. Surface to Ground (Rtg) < 1 x 106