Instrumentation – Cesstech

Products

Instrumentation

To measure static charge Simco has developed static measurement equipment with a Voltage sensor. The Voltage sensor gives a good indication of the static charge

IQ Power HL Sensor

Digital, not analog, technology offers higher accuracy and is impervious to noise.
Sensor is intrinsically safe allowing for easy installation without the use of conduit.
Communications cannot be corrupted due to data verifying algorithm.
Input Power 24 VDC, 30 mA nominal
Input Connection via (user supplied) Intrinsic Safety Barriers
Input Cable Lengths 30 ft (9.1m)

Download Datasheet

EA-5J Charge Plate Monitor

Compact, light weight and easy to use operation
Decay time and Ion balance can be measured with one touch operation.
1000 measurement values can be stored.
Measurement parameters can be selected depends on the type of ionizer.
Analog output is equipped.
Standard plate is complied with ANSI/ESD-STM3.1-2000. Small plate helps to measure for the hard to reach place.

Download Datasheet

TensION Voltage Tester

Convenient high-voltage indicator in pen size
There is no need to make contact with the device being controlled
The tip of the TensION illuminates when a voltage is detected
Power 2 size AAA batteries (included)
Measuring distance contactless (see table above)

Download Datasheet

IQ Easy Sensor Bar

Full web width charge monitoring
Up to 16 sensors
Air purge to keep sensors clean
Working distance 25 – 60 mm
Housing material (Reinforced) plastic
Cable Low voltage cable

Download Datasheet

FMX-004 Electrostatic Fieldmeter

Range 0 to ±1.49 kV (low range); ±1.0 kV to ±30 kV (high range)
Balance 0 to ±300V
Digital display with color coded bar graphs
Lightweight, compact design
Distance ranging lights
Audible alarm feature
Battery powered with auto shut-off feature
Analog Output

Download Datasheet