Wrist Strap Footwear

Tests operator’s resistance loop; wrist strap limits 750 kilohms to 10 megohms; footwear limits 750 kilohms to 100 megohms
Determines that operator’s personal grounding device is functioning correctly.
Separate test circuits for wrist straps and foot grounders
Rocker switch allows operator to quickly test all personal grounding devices.
Use with Single-Wire Wrist Straps
Durable, stainless steel test button
Long lasting; reduces wear and tear.
Powered by 9V battery or optional power adapter
Optional foot plate and stand

Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms1
Compatible with Single-Wire and Dual-Wire Wrist Straps
Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds
Reduces time spent testing personal grounding devices used in ESD Control Plans
Solid-State Test Switch with No Moving Parts
Maintains accuracy of tests and extends the lifetime of the tester
Split Foot Plate for Testing Foot Grounders (or ESD Shoes)
Tests both foot grounders independently at the same time
30 Volt Test Signal
Relay for Use with Automatic Doors or Other Locking Systems
Controls access to ESD Protected Areas
Optional Stand

Adjustable, elastic nylon material with conductive woven thread
Fits most sizes to provide reliable protection
Dual-Wire conductor provides redundancy
Even if one dual-wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire
Meets requirements of ANSI/ESD S20.20 and ANSI/ESD S1.1
3.4mm plug size
One megohm series resistor
To protect operator from accidental contact with equipment line voltage.
Superior resistor connection strain relief
Exceeds ANSI/ESD S1.1 Bending Life Test. Tested at over 200,000 cycles vs. the 16,000 requirement.

NEW 360° Rotation Between Wristband and Coil Cord
NEW Magnetic Connection Between Wrist Band and Coil Cord
Creates a superior electrical connection to eliminate intermittent failures that can occur in traditional snap connections using springs, extend lifespan of the wrist strap, and maintain a 1-5 pound perpendicular breakaway force to prevent accidental disconnects.
Dual Wire Metal Expansion Wristband and Coil Cord
Creates a path-to-ground for an operator with resistance <3.5 x 107ohms per the required limits of ANSI/ESD S20.20, tested per ANSI/ESD S1.1 or ESD TR53. If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor.
Coil Cord
3.5mm Right Angle Mono Plug Connector
Works with standard dual wire monitors and grounding jacks.
Relaxed Retraction Coil Cord

360º Rotation Between Wristband and Coil Cord
Promotes freedom of motion and reduces strain on the operator’s wrist
Magnetic Connection Between Wristband and Coil Cord
Creates a superior electrical connection to eliminate intermittent failures found in traditional snap and spring connections; extends the lifespan of the wrist strap and maintains a 1-5 pound perpendicular breakaway force to prevent accidental disconnects
Dual-Wire Wrist Strap
Creates a redundant path-to-ground for an operator with resistance <3.5 x 107 ohms per the required limits of ANSI/ESD S20.20 for
Method 1. If one conductor is damaged, the operator will maintain the path-to-ground through the second conductor.
Lightweight Thermoplastic Elastomer Construction

Adjustable Wrist Straps provide a comfortable, custom fit.
One size adjusts to most any size wrist to provide reliable, 360-degree protection.
A 1 megohm resistor is built into the ground cord. Available with 1/8 in. (4 mm) snap end.

Disposable non-woven fabric wrist strap that provides cost-effective and reliable grounding
Use for visitors and one-time use applications. Suited for shipment along with components and devices, such as memory upgrades, sound cards, etc., to provide protection at the receiving end.
Hypo-allergenic adhesive provides 360 degree contact with skin
Minimizes skin-to-band resistance.
Conductive adhesive on the copper foil adheres to any convenient electrical ground
Current limiting resistance is built into the plastic ribbon below the wrist band
Length: 5ft.
Individually packaged
Meets ANSI/ESD S20.20 wrist strap system required limit tested per ESD TR53

Made from stainless steel, the durable premium performance metal wrist band creates a reliable electrical contact to the user’s wrist.
The flex-metal style band uses adjustable links to assure a secure and comfortable fit.

Products