Special Application Ionizers

Balance ±50V @ 6” and 12” (30.5 cm) directly under emitter points with airflow (80-100 fpm)
Discharge <30 sec @ 12” (30.5 cm) directly under the emitter points with airflow (80-100 fpm)
Ion Emission Steady-state DC
Quadropole configuration with IsoStat® technology
Compact size
24 VAC or 24 VDC operation
Available with single crystal silicon emitter points
Alarm output to FMS or process tool controller

Balance ±10V (typ) around initial set point
Discharge1 10 sec (depending on environment)@ 12” (300 mm) with 100 fpm gas velocity (decay time for ±1000-100V)
Gas Clean dry air or Nitrogen with minimum purity 99.99%
Operates in temperatures as high as 150°C (302°F) and as low as -50°C (-58°F)
Balance control of better than ±10V standard meets the new stringent requirements for S20.20
Antenna to measure balance at the device location

Balance ±25V at specified flow and pressure measured at 6” from CPM
Discharge 4210 10 sec, 4210u 6 sec, 4210un 10 sec; measured through 6” long, 1/4” ID Teflon tube held 6” from the CPM; airflow rate of 120 scfm (2 scfm)
Gas CDA and/or Nitrogen
Easily connects to delivery manifolds
Ionizes either Clean Dry Air or Nitrogen
IsoStat® technology
Steady-state DC ion emission
Ultra-clean emitter points (u/un models)
Ultra-clean construction with carefully controlled current and geometry

Balance ±25V or less range with no output manifold, measured @ 150 mm (6”) from CPM,
Discharge Without manifold ±1000-100V, 10 sec or less (typ), measured @ 150 mm (6”) to CPM
ISO Class 1 (0.1 µm particles) and ISO Class 12 (0.01 µm particles)
Alarms indicating low ion output (maintenance required), high voltage power supply failure, and low gas flow
Standby mode
Self-balanced ionization
Auto shutoff with low gas flow
Compact size
+24 VDC Input Power

Balance Micro S: <±30V; Micro SA: <±20V
Discharge1 Micro S: <10 sec @ 3” (76 mm); Micro SA: <8 sec @ 6” (150 mm), 20 lpm airflow (min)
Coverage Area Micro S: 6” x 6” (150 x 150 mm) @ 3”; Micro SA: 6” x 6” (150 x 150 mm) @ 6”
Air Supply Clean Dry Air (CDA)
Compact design
Self-balancing technology
Easy maintenance
Power Indicator status LED
Air assist version for precise ionized air delivery

Air assist cartridge design with cross-channel air delivery
Two cartridge design options offers extended cleaning periods (standard with sheath air flow) or faster discharge times (jet with center orifice)
Rotatable cartridge design※Quadropole configuration with IsoStat technology Compact size
Single Crystal Silicon emitter points
Alarm output to FMS or process tool controller

Withstands temperatures up to 302°F (150°C) and down to -94°F (-70°C)
IsoStat® technology for intrinsically self balancing ionization
Small form factor with large ion output perfect for confined areas
Available with tungsten alloy or single-crystal silicon emitter points (ISO Class 2 compatible)
Unique ion guides help direct airflow towards the target

Products