4610 Extreme Environment Ionizer

  • Withstands temperatures up to 302°F (150°C) and down to -94°F (-70°C)
  • IsoStat® technology for intrinsically self balancing ionization
  • Small form factor with large ion output perfect for confined areas
  • Available with tungsten alloy or single-crystal silicon emitter points (ISO Class 2 compatible)
  • Unique ion guides help direct airflow towards the target

4635 QuadBar™ with Air Assist

  • Air assist cartridge design with cross-channel air delivery
  • Two cartridge design options offers extended cleaning periods (standard with sheath air flow) or faster discharge times (jet with center orifice)
  • Rotatable cartridge design※Quadropole configuration with IsoStat technology Compact size
  • Single Crystal Silicon emitter points
  • Alarm output to FMS or process tool controller

fusION Ionizing Bar

  • Discharge1 Without fan: <15 sec @ 6” (15.2 cm) with airflow (50 fpm/m)
  • With fan: <10 sec @ 12” (30.4 cm)
  • Balance <±50V
  • Coverage 12” x 12” (30 .4 x 30.4 cm) @ 6” (15.2 cm) spacing
  • Compact design
  • Air assist version for precise ionized air delivery
  • Auto balancing technology
  • Visual ionizer status indicator and digital level remote alarm output
  • Single power source for multiple fusION ionizers
  • Optional Fan assembly

ionONE Micro S & SA Spot Ionizers

  • Balance Micro S: <±30V; Micro SA: <±20V
  • Discharge1 Micro S: <10 sec @ 3” (76 mm); Micro SA: <8 sec @ 6” (150 mm), 20 lpm airflow (min)
  • Coverage Area Micro S: 6” x 6” (150 x 150 mm) @ 3”; Micro SA: 6” x 6” (150 x 150 mm) @ 6”
  • Air Supply Clean Dry Air (CDA)
  • Compact design
  • Self-balancing technology
  • Easy maintenance
  • Power Indicator status LED
  • Air assist version for precise ionized air delivery

4214 Nitrogen Gas Ionizer

  • Balance ±25V or less range with no output manifold, measured @ 150 mm (6”) from CPM,
  • Discharge Without manifold ±1000-100V, 10 sec or less (typ), measured @ 150 mm (6”) to CPM
  • ISO Class 1 (0.1 µm particles) and ISO Class 12 (0.01 µm particles)
  • Alarms indicating low ion output (maintenance required), high voltage power supply failure, and low gas flow
  • Standby mode
  • Self-balanced ionization
  • Auto shutoff with low gas flow
  • Compact size
  • +24 VDC Input Power

4210 In-line CDA/Nitrogen GAS Ionizer

  • Balance ±25V at specified flow and pressure measured at 6” from CPM
  • Discharge 4210 10 sec, 4210u 6 sec, 4210un 10 sec; measured through 6” long, 1/4” ID Teflon tube held 6” from the CPM; airflow rate of 120 scfm (2 scfm)
  • Gas CDA and/or Nitrogen
  • Easily connects to delivery manifolds
  • Ionizes either Clean Dry Air or Nitrogen
  • IsoStat® technology
  • Steady-state DC ion emission
  • Ultra-clean emitter points (u/un models)
  • Ultra-clean construction with carefully controlled current and geometry

4612 Extreme Temperature Ionizer

  • Balance ±10V (typ) around initial set point
  • Discharge1 10 sec (depending on environment)@ 12” (300 mm) with 100 fpm gas velocity (decay time for ±1000-100V)
  • Gas Clean dry air or Nitrogen with minimum purity 99.99%
  • Operates in temperatures as high as 150°C (302°F) and as low as -50°C (-58°F)
  • Balance control of better than ±10V standard meets the new stringent requirements for S20.20
  • Antenna to measure balance at the device location

4630 QuadBar™ Ionizer

  • Balance ±50V @ 6” and 12” (30.5 cm) directly under emitter points with airflow (80-100 fpm)
  • Discharge <30 sec @ 12” (30.5 cm) directly under the emitter points with airflow (80-100 fpm)
  • Ion Emission Steady-state DC
  • Quadropole configuration with IsoStat® technology
  • Compact size
  • 24 VAC or 24 VDC operation
  • Available with single crystal silicon emitter points
  • Alarm output to FMS or process tool controller

In-line fusION Ionizing Bar

  • Discharge – refer to brochure
  • Balance <±50V
  • Coverage Area 12” x 12” (30 x 30 cm) @ 6” spacing
  • Air Supply Clean Dry Air (CDA) or Nitrogen
  • Static control for “difficult to access” target locations
  • Compact Design
  • Visual ionizer status indicator and digital level remote alarm output
  • Single power source for multiple fusION ionizers
  • Optional air knife, air ring and N2 attachments available

fusION AA Ionizing Bar

  • Discharge1 <5 sec @ 6” (15 cm) at 10 psi gas pressure
  • Balance <±50V
  • Coverage Area 12” x 12” (30 x 30 cm) @ 6” (15 cm) spacing
  • Air Supply Clean Dry Air (CDA) or Nitrogen
  • Air assist connection
  • Compact design
  • Auto balancing technology
  • Visual ionizer status indicator and digital level remote alarm output
  • Single power source for multiple fusION ionizers