AeroBar® 5225S

  • Output Voltage 0-20 kVDC, ±10% for each polarity on an individual AeroBar; positive or negative output levels can be adjusted separately with IR Handheld Remote
  • Operating Mode Pulsed DC, steady-state DC or standby
  • All parameters are held within the AeroBar; no controller required
  • Fully adjustable parameters for each AeroBar utilizing Pulsed DC or Steady-state DC modes
  • Several AeroBar lengths including three lengths specifically designed for EFEMs
  • Ion current monitoring
  • FMS alarm output
  • Single-crystal silicon emitter points

AeroBar® 5225

  • Output Voltage 0-20 kVDC, ±10% for each polarity on an individual AeroBar; positive or negative output levels can be adjusted separately through GUI
  • Operating Mode Pulsed DC, steady-state DC or standby
  • Complete integration with tool control system
  • Fully adjustable parameters for each AeroBar
  • Ion current monitoring
  • Several lengths available including 3 specifically designed for EFEMs
  • Single-crystal silicon emitter points

AeroBar® 5685

  • Discharge1 25 sec or less for ±1000V to ±100V discharge @ 24” with min 60 fpm airflow
  • Balance
  • ±50V @ 24” measured directly below two opposite polarity emitter points (Model 5685 must be mounted at least 6” away from grounded surfaces for optimum balance performance)
  • IsoStat® technology
  • Steady-state DC ion emission for high ion density
  • Single-crystal silicon or titanium emitter points
  • Multiple lengths, including short 11 inch AeroBars

AeroBar® 5285e

  • Sequenced bipolar ionization
  • Unique aerodynamic design
  • Individual positive and negative power controls at each bar
  • Ion current regulation and operational failure alarm

AeroBar® 5645

  • Balance <±5V, Novx System; <±5V, Novx Inside; <±20V, Standalone
  • Discharge 15 sec (typ) with no air-assist measured @ 24” below AeroBar center
  • Ion Emission Modulated Pulse (MP) technology
  • ±20V or better balance as standalone, or ±5V with Novx monitoring and feedback system
  • Compatible with ISO 14644-1 class 3 or better
  • Centralize power and control with widely adjustable software
  • Sensor input, FMS connection, alarms, power and communications are located on the same end of the bar
  • Available in 14 lengths, from 350-2350 mm

AeroBar® 5635M

  • Output Voltage 13.5 kV p-p (max), adjustable
  • Distance 150-1000 mm distance to surface; application & customer specification dependent
  • Ion Emission Modulated pulse (MP) technology
  • Balance Auto balancing system <±20V
  • ISO 14644-12 (0.01 µm particles) ionization and
  • ISO 14644 Class 1 (0.1 µm particles) cleanliness
  • Modulated pulse technology
  • Metal-free design “M”
  • Excellent lateral uniformity
  • Low field voltages
  • Air-assist capability
  • Optional software with easy-to-use interface with wide adjustability
  • Alarm output signal

AeroBar® 5635

  • Output Voltage 13.5 kV p-p (max), adjustable
  • Distance 150-1000 mm distance to surface; application & customer specification dependent
  • Ion Emission Modulated pulse (MP) technology
  • Balance Auto balancing system <±20V
  • ISO 14644-12 (0.01 µm particles) ionization and
  • ISO 14644 Class 1 (0.1 µm particles) cleanliness
  • Modulated pulse technology
  • Excellent lateral uniformity
  • Low field voltages
  • Air-assist capability
  • Optional software with easy-to-use interface with wide adjustability
  • Alarm output signal

IONforce

  • Discharge <10 sec (typ), 24” with 50 fpm laminar airflow
  • <5 sec (typ) with 90 lpm CDA air assist
  • Balance <30V (typ), 24” with 50 fpm laminar airflow
  • Low Profile
  • Operates in either steady state DC or pulse DC mode
  • Optional compressed air assist feature
  • Tungsten and ultra-clean silicon emitter point options
  • Ion Emission Steady state DC, Pulsed DC

AeroBar® 5711

  • Balance <±25V over the length of the bar; maintains balance performance >6 months without cleaning (in an ISO 14644 Class 4 or better environment)
  • Performance 3.5 sec decay average @ 600 mm (typ) measured at 5711 AeroBar center and 25 mm straight air jet spacing, 18 l/m purging air, (250 mm long AeroBar), no laminar flow; setting 1 Hz, 100% output, CPM: balance <±10V; swing 100V pk-pk
  • Compact Size (150 or 250 mm length)
  • Unique corona wire design (no emitter points)
  • MicroPulse high voltage technology
  • Remotely mounted controller for 5711 AeroBar

AeroBar® 5710

  • Discharge1 <1.5 sec for ±1000V to ±100V discharge @ 30cm (12”), 50 mm air jet spacing with min CDA 2 lpm/airjet
  • Balance Inherently self-balancing system <±25V over the length of the bar; maintain balance setting >6 months without cleaning in clean environments
  • MicroPulse high voltage technology
  • Range 150-2000 mm, application and specification dependent
  • Flexible and powerful setup
  • Unique corona wire design (no emitter points)