Tetra Bar

  • High performance and rugged construction
  • Straight-end HV connector or an optional right-angle connector
  • High voltage cable is flame retardant, highly flexible, and removable
  • Type – Direct connect to high voltage
  • Points – 316 SS fixed
  • Profile – 1.31 inch diameter PVC

HD Det

  • Detection of perforations over a large area
  • Detection of very small perforations possible
  • Housing ABS/PTFE
  • Cable low voltage cable, standard M12 connector
  • Input power 24 V DC, <0,5 A
  • Emitter pins special alloy

Perfomaster

  • Incorporated high voltage power supply, input voltage 24V DC
  • No high voltage cables needed
  • Wo-colour status LED: – Green LED: signals operation OK – Red LED: An intermittent LED signals a perforation detected
  • Supply voltage and output voltage setting can be provided: – Directly from the machine f.e. PLC – With additional external control kit
  • Housing material ABS / PTFE
  • Cable low voltage cable, standard M12 connector
  • Input power 24 V DC, <0,5 A
  • Emitter pins special alloy

IML Spider

  • IML Spider block with 8 positions
  • Each output limited with a resistor
  • Quick connect cables and electrodes
  • Daisy chain possible
  • Electrodes custom sizes
  • Unlimited combinations with all IML generators
  • Also available as Junction Block without resistor
  • Operating Voltage Max. 18 kV DC
  • Current Output IML Spider (Head) max. 0,7 mA (@duty cycle 20%, cycle 5 s)

IML Easycore

  • 2 component resin for construction of IML cores Even very complex and small cores can be constructed
  • Comes in duo-packs consisting of the resin and the correct amount of hardener
  • Available in 250 and 500 g
  • Pot life 150g 20 – 40 minutes
  • Gel time 150g mass @ 25°C 40 – 80 minutes
  • Minimum cure Full cure
  • Cure schedule 24 hours @ 20°C | 1 week @ 20°C
  • Cure schedule 2 hours @ 60°C | 4 hours @ 60°C
  • Cure schedule 1 hours @ 80°C | 2 hours @ 80°C

HDC/HDR Bar

  • The HDR charging bar suits high velocity applications. Each individual point being fitted with a resistor, so the chance of spark-over is strongly reduced.
  • Charging bar Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV
  • Suits high velocity applications
  • Chance of spark-over is strongly reduced

Pinner Superbar

  • Maximum voltage and current output
  • Easy installation and adjustment
  • Replaceable ionizing pins
  • Detachable HV cable for easy cleaning and maintenance
  • Type Resistor-coupled, arc resistant
  • Points 316 SS, removable, replaceable
  • Profile 1.25 inches x 6.5 inches, PVC
  • Inner Bar RTV silicone compound
  • Length 14.25 inches overall

Pinner-LP Bar

  • Low profile design
  • Fully encapsulated quality construction
  • Current-limited for operator safety and reduced EMI/RFI
  • Long life emitter pins
  • Designed for rugged industrial use
  • Input Voltage ±30 kVDC max
  • Output Current Continuous Use: 0.75 mA/ft max
  • Intermittent Use: 1.50 mA/ft max

Pinner Bar

  • Super-rugged design for Industrial Environments
  • Resistively coupled for operator safety and reduced EMI emissions
  • High output for outstanding pinning performance
  • Part of the Innovative Chargemaster System, for demanding Industrial applications
  • Input Voltage ±30 kVDC (±60 kVDC with special mounting and insulation precautions)
  • Output Current 1.5 mA/ft max

Pinner Charging 5/6 Point/Claw/Linear

Current limited design for operator and equipment protection Replaceable pins to ensure maximum pinning performance Minimized EMI and RFI generation, preventing disruption of sensitive controls Optional manual adjust gooseneck with easy lock/release feature and insulative brackets Replaceable pins to ensure maximum pinning performance Rated for use in temperatures to 500°F