Skip to content
The Cushion Shielding Bag 2120R protects devices from physical damage as well as provides static shielding. They also offer a heat sealable inner surface.
0.0036″ (3.6 mil) Thick Bag Film laminate constructed from multiple layers of aluminized polyester and polyethylene
Designed for moisture and electrostatic discharge (ESD) sensitive items (such as SMT). Meets ANSI/ESD S20.20, ANSI/ESD S541, EIA 541, JESD625-A, and EIA 583.
</= 0.03 Grams Moisture Vapor Transmission Rate (MVTR)
Designed for dry packing of moisture sensitive devices and to protect contents from damage due to ESD events or EMI.
<10 nJ Energy Penetration Tested per ANSI/ESD STM11.31
Protects contents from ESD charges and discharges. Meets the requirement for discharge shielding per Static Control Bag ANSI/ESD S11.4 Level 3.
>20lb Puncture Strength Average
Metal-Out Bags Required by Some Leading Hi-Tech Companies, Exterior Surface Rs 1 x 104 to < 1 x 108 ohms per ANSI/ESD STM11.11
Metal-Out lower exterior resistance retains less electrostatic charge than Metal-In bags
Metal-Out Shielding Laminate 0.003” thick (3 mil)
Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD) outside the ESD Protected Area
<10 nJ Discharge Shielding Energy Penetration Test per ANSI/ESD STM11.31
Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD shielding packaging inside and outside an ESD Protected Area (EPA)
Dissipative Inner Surfaces Rs 1 x 104 to < 1 x 1011 ohms per ANSI/ESD STM11.11 meets Static Control Bag ANSI/ESD S11.4 Level 3
Metal-In Film Laminate 0.0032” thick (3.2 mil)
Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)
<20 nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31
Meets ANSI/ESD S20.20 and ANSI/ESD S11.4 requirements for ESD shielding packaging inside and outside an ESD Protected Area (EPA).
>22lb Puncture Strength Average
Provides physical protection for contents.
Rs 1 x 104to <1 x 1011 ohms per ANSI/ESD STM11.11, Packaging ANSI/ESD S541 and Static Control Bag ANSI/ESD S11.4 Level 3
Metal-In Film Laminate 0.0028” thick (2.8 mil)
Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)
<10 nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31
Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD shielding packaging inside and outside an ESD Protected Area (EPA)
Dissipative Inner and Outer Surfaces Rs 1 x 104 to <1 x 1011 ohms per ANSI/ESD STM11.11 and Static Control Bag ANSI/ESD S11.4 Level 3
Printed with ESD Protective Symbol and Lot Code Information
Meets the requirements of ANSI/ESD S541 for quality control purposes
Lead-free RoHS 2, REACH and Conflict Minerals Compliant
The cartridge bag protects the cartridge by providing light and moisture barrier. This bag features a tough polyester outer layer, an aluminum layer for moisture protection, and a heat sealable black polyethylene light barrier.
